rss User Login
Structural Material Laboratory  - Saitama University

言語選択

Research Theme

Member

Class

Publication

学外学術報告

コンクリートカヌー

ログイン

Username:

Password:



Lost Password?

Dr. Shingo Asamoto

flagflag
Associate Professor, Doctor of Engineering
asamotomail.saitama-u.ac.jp

With Prof. Anura at Univ. of Moratuwa
 

Nice Eurorpean friends Dr. Farid (left)
& Dr. Miguel (right)

With Dr. Bruno in Concreep 8

Syner'18 Crete Chair Dr. Miguel


Education
1977.5: Born in Yamaguchi
2001.3: B. Eng. in Faculty of Engineering, Department of Civil Engineering, University of Tokyo
2003.3: M. Eng. in Graduate School of Engineering, Department of Civil Engineering, University of Tokyo
2006.3: D. Eng. in Graduate School of Engineering, Department of Civil Engineering, University of Tokyo
2006.4-5: Researcher in Graduate School of Engineering, Department of Civil Engineering, University of Tokyo
2006.6-2013.3: Assistant Professor, Department of Civil & Environmental Engineering, Saitama University
2013.4-: Associate Professor, Department of Civil & Environmental Engineering, Saitama University
2010.9-2011.8: Visiting researcher, Oxand SA in France

Research areas
  • Study on characteristics of cementitious materials subjected to high temperature (collaborated with CRIEPI and Hokkaido university)
  • Evaluation of cementitious materials mechanical behavior in deep underground (collaborated with Oxand, France)
  • Study on durability of concrete with mineral admixture(collaborated with JR East)
  • Prediction model for concrete structures deterioration based on actual environmental actions such as raining and sun radiation
  • Study on the mechanism of concrete time-dependent deformation based on microscopic approach
  • Investigation into concrete shrinkage based on aggregate properties
  • Shrinkage crack assessment of actual RC structures

Doctor Dissertation
Title: Enhanced Multi-scale Constitutive Model of Solidifying Cementitious Composites and Application to Cracking Assessment of Concrete Structures, 2006.3, University of Tokyo
(Exam. Committee: Dr. T. Ishida(chair), Dr. K. Maekawa, Dr. T. Kishi, Dr. T. Noguchi, Dr. M. Hori and Dr. J. Inoue)

Technical papers
Cement and Concrete Research
Cement and Concrete Composites
Journal of Advanced Concrete Technology
  1. S. Asamoto, T. Ishida and K. Maekawa: Time-Dependent Constitutive Model of Solidifying Concrete Based on Thermodynamic State of Moisture in Fine Pores, Journal of Advanced Concrete Technology, 4 (2) pp.301-323, 2006.6
  2. S. Asamoto, T. Ishida and K. Maekawa: Investigations into Volumetric Stability of Aggregates and Shrinkage of Concrete as a composite, Journal of Advanced Concrete Technology, 6 (1) pp.77-90, 2008.2
  3. Nguyen Trong Lam, Shingo Asamoto, Kunio Matsui: Microstructure and Shrinkage Behavior of Autoclaved Aerated Concrete(AAC) -Comparison of Vietnamese and Japanese AACs-, Journal of Advanced Concrete Technology, 16 (8) pp.333-342, 2018
Construction and Building Materials
  1. N. D. Hai, H. Mutsuyoshi, S. Asamoto, T. Matsui: Structural Behavior of Hybrid FRP Composite I-Beam, Construction and Building Materials, Vol. 24, pp. 956-969, 2010.6
  2. S. Asamoto, K. Kato, and T. Maki: Effect of creep induction at an early age on subsequent prestress loss and structural response of prestressed concrete beam, Construction and Building Materials, Vol. 70, pp. 158-164, 2014.11
  3. S. Asamoto, K. Murano,I. Kurashige and A. Nanayakkara: Effect of carbonate ions on delayed ettringite formation, Construction and Building Materials, Vol. 147, pp. 221-226, 2017.8
Journal of Asian Concrete Federation
Energy Procedia
Engineering Computations
International Journal of GEOMATE
Proceedings of Japan Society of Civil Engineers
  1. S. Asamoto and T. Ishida: Microscopic approach to time-dependent deformation mechanism of concrete based on liquid characteristics, Proceedings of JSCE, No.760/V-63, pp.159-172, 2004.5 (In Japanese)
  2. S. Asamoto, T. Ishida and K. Maekawa: Analysis of concrete shrinkage coupling with properties of aggregate, Proceedings E of JSCE, Vol. 63, No. 2, pp.327-340, 2007.6 (In Japanese)
  3. S. Okazaki, S. Asamoto and T. Kishi: An investigation into water behavior in micropores based on molecular dynamics simulation, Proceedings E of JSCE, Vol. 65, No. 3, pp.311-321, 2009.7 (In Japanese)
Concrete Research and Technology
  1. S. Asamoto, A. Ohtsuka, C. Miura and Y. Kuwahara: Study on shrinkage and shrinkage cracking behavior of concrete under actual environmental condition, Concrete Research and Technology, Vol.21, No.2, Issue 53, pp.35-43, 2010 (In Japanese)
  2. O. Sanada, H. Mutsuyoshi, S. Asamoto and N. Inoue: Characteristic of Chloride Ion Diffusion in Mortar Mixed with Ion-Exchange Resin, Concrete Research and Technology, Vol. 24, No. 3, pp. 123-134, 2013 (In Japanese)
Cement Science and Concrete Technology
  1. S. Asamoto, M. Kato, T. Maki and I. Kurashige: Investigation into effect of curing temperature and mineral admixtures on shrinkage cracking resistance by advanced shrinkage restrain test, Cement Science and Concrete Technology, No.66, pp.95-102, 2012 (In Japanese)
  2. S. Asamoto, K. Matsui and K. Kato: Study on volumetric change mechanism of hardened cement paste based on liquid characteristics in fine pores, Cement Science and Concrete Technology, No.67, pp.195-202, 2013 (In Japanese)
Proceedings of the Japan Concrete Institute
  1. T. Matsumoto, P. Suthiwarapirak, S. Asamoto: Model development of ECC fatigue analysis, Proceedings of the Japan Concrete Institute, vol.24, No.1, pp.237-242, 2002 (In Japanese)
  2. S. Asamoto and T. Ishida: Influence of liquid characteristic and its distribution in micro-pores on time-dependent mechanical, Proceedings of the Japan Concrete Institute, Vol.25, No.1, pp.509-514, 2003 (In Japanese)
  3. S. Asamoto and T. Ishida: Coupled analysis of moisture state and mechanical behavior under arbitrary temperature conditions, Proceedings of the Japan Concrete Institute, Vol.27, No.1, 2005, pp.451-456 (In Japanese)
  4. S. Asamoto, K. Tamaki, A. Ohtsuka and H. Mutsuyoshi: Study on shrinkage behavior of concrete exposed to actual environmental conditions, Proceedings of the Japan Concrete Institute, Vol.29, No.1, pp.681-686, 2007 (In Japanese)
  5. K. Tamaki, H. Mutsuyoshi, S. Asamoto and H. Mikami: Experimental study on cracking behavior of concrete with expansive admixture and vinylon fiber, Proceedings of the Japan Concrete Institute, Vol.29, No.1, pp.807-812, 2007 (In Japanese)
  6. M. Takagi, H. Mutsuyoshi, S. SILVIA, S. Asamoto: Cracking behavior of prestressed reinforced high strength concrete beams, Proceedings of the Japan Concrete Institute, Vol.29, No.3, pp.577-582, 2007 (In Japanese)
  7. S. SILVIA, H. Mutsuyoshi, S. Asamoto, M. Takagi: Shear Cracking Behavior of High-Strength Prestressed Reinforced Concrete Beams, Proceedings of the Japan Concrete Institute, Vol.29, No.3, pp.679-684, 2007
  8. H. Takase, H. Mutsuyoshi, K. Noda and S. Asamoto: Enhancement of RC bridge management system and application to actual bridges, Proceedings of the Japan Concrete Institute, Vol.29, No.3, pp.1711-1716, 2007 (In Japanese)
  9. S. Asamoto, H. Shinozaki, H. Mikami, H. Mutsuyoshi: Study on flexural cracking behavior of PRC beams after long term outside exposure, Proceedings of the Japan Concrete Institute, Vol.30, No.3, pp.559-565, 2008 (In Japanese)
  10. A. Ohtsuka, C. Miura, S. Asamoto and H. Mutsuyoshi: Influence of rain and sun radiation on shrinkage behavior of concrete, Proceedings of the Japan Concrete Institute,Vol.30, No.1, pp.501-506, 2008 (In Japanese)
  11. K. Kawana, T. Nishioka, H. Mutsuyoshi and S. Asamoto: Corrosion of reinforcements in RC and PRC beams by electrically accelerated corrosion test, Proceedings of the Japan Concrete Institute, Vol.30, No.1, pp.825-830, 2008 (In Japanese)
  12. A. Maekawa, H. Mutsuyoshi, S. Silvia and S. Asamoto: Cracking behavior of prestressed reinforced ultra-high-strength concrete beams, Proceedings of the Japan Concrete Institute, Vol.30, No.3, pp.637-642, 2008 (In Japanese)
  13. S. Silvia, H. Mutsuyoshi, S. Asamoto, A. Maekawa: Shear cracking behavior of ultra-high-strength prestressed reinforced concrete beams, Proceedings of the Japan Concrete Institute, Vol.30, No.3, pp.823-828, 2008 (In Japanese)
  14. K. Kato, S. Asamoto, K. Matsui: Study on shrinkage mechanism of porous media based on characteristics of liquid in fine pores, Proceedings of the Japan Concrete Institute, Vol.31, No.1, pp.613-618, 2009 (In Japanese)
  15. M. Kato, T. Tsuji and S. Asamoto: Influence of temperature on moisture loss and drying shrinkage of mortar with blast furnace slag, Proceedings of the Japan Concrete Institute, Vol.32, No.1, pp.203-208, 2010 (In Japanese)
  16. S. Asamoto, R. Miyakoshi, T. Tsuji and K. Matsui: Volumetric change of hardened cement paste related with characteristics of adsorbed liquid on gel solid surface, Proceedings of the Japan Concrete Institute, Vol.32, No.1, pp.593-598, 2010 (In Japanese)
  17. R. Takeda, H. Mutsuyoshi, S. Asamoto and H. Watanabe: Shear behavior of reinforced concrete beams using ultra-high-strength concrete, Proceedings of the Japan Concrete Institute, Vol.32, No.2, pp.679-684, 2010 (In Japanese)
  18. S.V.T. J. Perera, H. Mutsuyoshi, R. Takeda, and S. Asamoto: Shear Behavior of High Strength Concrete Beams, Proceedings of the Japan Concrete Institute, Vol.32, No.2, pp.685-690, 2010
  19. T. Tsuji, M. Kato, S. Asamoto and I. Kurashige: Study on shrinkage behavior of mortar with mineral admixture focusing on curing and drying temperature, Proceedings of the Japan Concrete Institute, Vol.33, No.1, pp.509-514, 2011 (In Japanese)
  20. K. Matsui and S. Asamoto: Comparison of microstructures between hydrated cement paste and autoclave aerated concrete by measuring heat of immersion and gas adsorption, Proceedings of the Japan Concrete Institute, Vol.33, No.1, pp.605-610, 2011 (In Japanese)
  21. R. Hirai, H. Isozalo and S. Asamoto: Study on carbonation and pore structure change of cementitious materials exposed to supercritical state of CO2, Proceedings of the Japan Concrete Institute, Vol.35, No.1, pp.1933-1938, 2013
  22. S. Asamoto, T. Yokoi, M. Hirabayashi and K. Kobayashi: Effect of curing days and wettting&drying on bending cracking of RC members with blended cement under sustained load, Proceedings of the Japan Concrete Institute, Vol.36, No.1, pp.712-716, 2014
  23. H. Furuta, Y. Luan, S. Asamoto, D. Yoneda: Study on internal water repellency and material properties of cementitious materials with several hydrophobic agents, Proceedings of the Japan Concrete Institute, Vol.38, No.1, pp.693-698, 2016
  24. M. Tsukahara and S. Asamoto: Study on compressive strength of well cement paste exposed to 200 C based on the characteristic change, Proceedings of the Japan Concrete Institute, Vol.38, No.1, pp.417-422, 2016
  25. S. Asamoto, K. Murano, I. Kurashige and Anura Nanayakkara: Effect of carbonate ion on delayed Ettringite formation, Proceedings of the Japan Concrete Institute, Vo.38, No.1, pp.819-824, 2016
  26. Y. Luan, S. Asamoto and T. Yoneda: An experimental study of shrinkage behavior of bulk hydrophobic mortar, Proceedings of the Japan Concrete Institute, Vo.39, No.1, pp.409-414, 2017

International conferences
  1. S. Asamoto, and T. Ishida: Influence of liquid characteristic and its distribution in micro-pore on time-dependent mechanical behavior of concrete, Engineering Conference on Advances in Cement and Concrete, Copper Mountain, Colorado, pp.181-190, 2003.8
  2. S. Asamoto, and T. Ishida: Influence of Thermo-Hygro Profile and Micro-Pore Characteristic on Time-Dependent Mechanical Behavior of Concrete, Proceedings of the 9th East Asia-Pacific Conference on Structural Engineering and Construction, Bali, Indonesia, CMD-pp.8-13(in CD-ROM), 2003.12
  3. Y. Furuya, S. Asamoto, and T. Ishida: Effect of Aggregate Stiffness and Porosity on Shrinkage of Concrete, EASEC10, MATERIALS EXPERIMENTATION MAINTENANCE AND REHABILITATION, p737-742, 2006.8
  4. T. Ishida, S. Asamoto and K. Maekawa: Multi-scale Constitutive Model of Solidifying Cementitious Composites and Application to Cracking Assessment of a Concrete Structure, Advances in Concrete through Science and Engineering, 2nd International RILEM symposium, Quebec, Canada, (in CD-ROM), 2006.9 (Keynote)
  5. H. Mutsuyoshi, T. Aravinthan, S. Asamoto and K. Suzukawa: Development of New Hybrid Composite Girders Consisting of Carbon and Glass Fibers, COBRAE conference 2007 Benefits of composites in civil engineering, 2, university of Stuttgart, 2007.3
  6. S. Asamoto, H. Mutsuyoshi, T. Aravinthan and K. Suzukawa: Experimental investigation of innovative hybrid composite girders with GFRP and CFRP, Innovations in Structural Engineering and Construction, 4th International Structural Engineering and Construction Conference, pp.669-675, 2007
  7. H. Mutsuyoshi, T. Aravinthan, S. Asamoto, A. C. Manalo and K. Suzukawa: Flexural behavior of hybrid FRP girder with concrete deck, Asia-Pacific Conference on FRP in structures(APFIS 2007), included in CD-ROM, 2007
  8. S. Asamoto, T. Ishida, and K. Maekawa: Multi-scale time-dependent deformation model of solidifying cementitious materials coupling with aggregate properties, 2nd international conference on concrete modeling (ConMod08), pp.225-232, Delft, Netherlands, 2008.5.27
  9. S. Asamoto and A. Ohtsuka: Study on shrinkage behavior of concrete exposed to actual environmental conditions, Sustainable infrastructure development in Asia, Proceedings of the international exchange symposium by ICGP, pp.68-73, University of Peradeniya, Sri Lanka, Sep. 2008
  10. S. Asamoto, T. Ishida, and K. Maekawa: Multi-scale analysis of concrete shrinkage coupling with aggregate properties, Proceedings of the eight international conference on creep, shrinkage and durability of concrete and concrete structures, vol.1, pp.161-167, Ise-shima, Japan, 2008.9
  11. A. Ohtsuka, S. Asamoto, and C. Miura: Influences of environmental factors on shrinkage behavior of concrete, Proceedings of the eight international conference on creep, shrinkage and durability of concrete and concrete structures, vol.2, pp.1419-1425, Ise-shima, Japan, 2008.9
  12. T. Ishida, K. Maekawa, A. Bongochgetsakul and S. Asamoto: Multi-scale constitutive model of solidifying concrete coupled with micro-physical properties of cementitious composites, Proceedings of the eight international conference on creep, shrinkage and durability of concrete and concrete structures, vol.1, pp.145-152, Ise-shima, Japan, 2008.9
  13. H. Mihashi, K. Maekawa, T. Ishida, S. Asamoto and I. Maruyama: Multi-scale modeling to link observed behavior, characterization and analysis (JCI committee report), Proceedings of the eight international conference on creep, shrinkage and durability of concrete and concrete structures, vol.1, pp.117-144, Ise-shima, Japan, 2008.9
  14. A.C. Manalo, H. Mutsuyoshi, S. Asamoto, T. Aravinthan, and T. Matsui: Mechanical behavior of hybrid FRP composites with bolted joints, Proceedings of 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), pp.43-53, Dec. 2008
  15. H. Mutsuyoshi, N. D. Hai, S. Asamoto, H. Minn, and T. Matsui: Composite behavior of hybrid CFRP-GFRP bridge girders, Proceedings of 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), pp.61-67, Dec. 2008
  16. S. Asamoto and M. Kato: Investigation into shrinkage behavior of mortar with blast-furnace slag based on micromechanics, Sustainable infrastructure development in Asia, Proceedings of the international exchange symposium by ICGP, pp.19-25, University of Ruhuna, Sri Lanka, Sep. 2009
  17. R. Chammas, S. Asamoto, E. Houdu, and O. Poupard: Long term containment: well integrity assessment and modeling for CO2, 10th Annual Conference on Carbon Capture and Sequestration, Pittsburg, Pennsylvania US, May 2011
  18. S. Asamoto, Y. Le Guen, O. Poupard, and B. Capra: Well Integrity Assessment for CO2 Injection - Thermo-Mechanical Behavior in Downhole CO2 Environment, Proceedings of the International Conference on Recent Advances in Nonlinear Models - Structural Concrete Applications(CoRAN 2011), pp.525-535, 2011
  19. S. Asamoto, T. Tsuji and I. Kurashige: Study on moisture loss and drying shrinkage behavior of mortar with mineral admixture based on pore structure, Proceedings of international symposium on Advanced in Civil and environmental Engineering Practices for Sustainable development (ACEPS), pp.245-250, University of Ruhuna, Sri Lanka, Mar. 2012
  20. Sewwandi, B.G.N., T. Koide, K. Kawamoto, S. Hamamoto, S. Asamoto, and H. Sato: Evaluation of leachate contamination potential of municipal solid waste dumpsites in Sri Lanka using leachate pollution index. Proceedings of Fourteenth International Waste Management and Landfill Symposium (Sardinia 2013), 233, 2013
  21. S. Shahzad, H. Yamaguchi, R. Takanami and S. Asamoto: Detection of corrosion-induced damage in reinforced concrete beams based on structural damping identification, EASEC13, included in CD, 2013.9
  22. R. Hirai, H. Isozaki and S. Asamoto: Study on Carbonation and Pore Structure of Cementitous Materials Exposed to Supercritical CO2, Proceedings of 12th international symposium on New Technologies for Urban Safety of Mega Cities in Asia (USMCA 2013), pp.777-786, Vietnam, Hanoi, Oct. 2013
  23. S. Asamoto, K. Murano, I. Kurashige and D. Minato: Investigation into Characteristics of Cementitious Materials Exposed to High Temperature, Proceedings of the 6th Asia-Pacific Young Researchers and Graduate Symposium, The Structural Engineering for Sustainable Development (YRGS2014), pp.109-114, SIIT, Thailand, July 2014
  24. S. Asamoto, K. Murano, I. Kurashige and A. Nanayakkara: Investigation into Effect of Mineral Admixture on Delayed Ettringite Formation, Proceedings of the 4th International Symposium on Engineering, Energy and Environment (ISEEE2015), pp.359-364, Thammasat University, Pattaya Campus, Chonburi, Thailand, Nov. 2015
  25. H. Furuta, Y. Luan, S. Asamoto and T. Yoneda: Development of an Internal Hydrophobic Cementitious Material, Proceedings of the 4th International Symposium on Engineering, Energy and Environment (ISEEE2015), pp.365-370, Thammasat University, Pattaya Campus, Chonburi, Thailand, Nov. 2015
  26. M. Tsukahara and S. Asamoto:Investigation of admixture effect on degradation of cement paste in injection well, 6th international conference on structural engineering and construction management 2015, Kandy, Sri Lanka, Dec. 2015
  27. T. L. Nguyen and S. Asamoto:Shrinkage Of Autoclaved Aerated Concrete Under Various Temperature And Relative Humidity Conditions, The 7th International Conference of Asian Concrete Federation "SUSTAINABLE CONCRETE FOR NOW AND THE FUTURE", Hanoi, Vietnam, 2016, in USB
  28. J. Sato, S. Asamoto, P. Wiwatrojanagul, and R. Sahamitmongkol:Preliminary Field Survey of Deteriorated Concrete Structures in Tropical Conditions with Non-Destructive Methods - Case Study: Short Span Bridges in Bangkok, Thailand, Proceedings of The 8th Asia and Pacific Young Researchers and Graduates Symposium (YRGS 2017), in USB, 2017
  29. K. Okubo, P. Chun and S. Asamoto:Characteristics of Bridge Deterioration based on inspection data in Japan, Proceedings of the Eastern Asia Society for Transportation Studies, Vol.12 in Ho Chi Minh, Vietnam (CD-ROM), 2017
  30. T. L. Nguyen, G. Illangakoon, S. Asamoto, and A. Nanayakkara:Cold Joint Formation of Concrete in Hot Weather Conditions, The 2nd ACF Symposium 2017 “Innovations for Sustainable Concrete Infrastructures”, Chiang Mai, Thailand, 2017, in USB
  31. T. L. Nguyen, S. Asamoto, K. Matsui:Length change behavior of autoclaved aerated concrete at various relative humidity - Comparison between Japanese and Vietnamese AACs -, ce/paper 6th International conference on Autoclaved Aerated Concrete, pp. 155-161, 2018
  32. K. Matsui, S. Asamoto, A. Ogawa:Length change characteristics of autoclaved aerated concrete and other porous media based on pore structure, ce/paper 6th International conference on Autoclaved Aerated Concrete, pp. 147-153, 2018
  33. S. Asamoto, R. Yuguchi, I. Kurashige and P. J. Chun: Effect of high temperature at early age on interfacial transition zone and material properties of concrete, Proceedings of SynerCrete'18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, (in press), 2018

Keynote speech
  1. S. Asamoto: Study on Mechanism of Hardened Cement Paste Volumetric Change Based on Liquid Characteristics in Fine Pores, Proceedings of international symposium on Advanced in Civil and environmental Engineering Practices for Sustainable development (ACEPS), University of Ruhuna, Sri Lanka, Sep. 2013 (Keynote)
  2. S. Asamoto: Hot weather concreting issues and application of mineral admixtures, Proceedings on annual sessions ? 2018, the Society of the Structural Engineers, Sri Lanka Colombo, pp.1-5, (Keynote) (2018)
Awards
  • The best paper of the year from Japan Society of Civil Engineers (with Dr.Ishida, Dr.Maekawa and Dr.Zhu), 2005
  • The best paper of the year by a young researcher from Japan Society of Civil Engineers, 2008
  • The excellent presentation award in the 64th Japan Cement Association Annual Convention in 2010
  • The excellent presentation award in the Japan Concrete Institute Annual Convention in 2010
  • The excellent presentation award in the 65th JSCE Annual Convention in 2010
  • The best research of the year by a young researcher from Japan Concrete Institute in 2012
  • The excellent presentation award in the 67th Japan Cement Association Annual Convention in 2013

(Student advisee)
  • Kyosuke Kato: The excellent presentation award in the 63rd JSCE Annual Convention in 2008
  • Kyosuke Kato: The excellent presentation award in the 64th JSCE Annual Convention in 2009
  • Hikaru Isozaki: The excellent graduate thesis award in Department of Civil & Environmental Engineering Saitama university in 2012
  • Miharu Tsukahara: The excellent graduate thesis award in Department of Civil & Environmental Engineering Saitama university in 2014
  • Joshi Nirmal Raj: The excellent master thesis award in Department of Civil & Environmental Engineering Saitama university in 2014
  • Kohki Murano: The excellent master thesis award in Department of Civil & Environmental Engineering Saitama university in 2015
  • Illangakoon Pathiranage Gayan Buddhika Illangakoon: The excellent master thesis award in Department of Civil & Environmental Engineering Saitama university in 2016

To international students who intend to study in Saitama University

Firstly, please contact with FSO(http://intl.civil.saitama-u.ac.jp/).

Printer friendly

 

Powered by Structural Material Laboratory © 1996- Distributed by XOOPS Cube 2.2 Distribution Team.